Malibu V6-3.1L VIN J (2002)
Installation Procedure
1. Connect the electrical connector to the power seat switch.
2. Position the power seat switch to the seat cushion frame.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the power seat switch screws.
Tighten the screws to 3 N.m (27 lb in).
4. Adjust the front seat cushion cover. Refer to Seat Cushion Cover Replacement - Front.
5. Align the bezel to the power seat switch and press into place until fully seated.
6. Adjust the front bucket seat to the original position.
