Malibu V6-3.1L VIN J (2002)
1. Install the seat back cover to the seat back pad.
2. Use firm hand pressure in order to fasten the hook and the loop retainers, securing the rear seat back cover to the pad.
3. Install the seat back cover to the split/folding rear seat back.
4. Install the new stables to the split/folding rear seat back.
5. Use firm hand pressure in order to fasten the hook and the loop retainer on the rear split folding seat back cover.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the pivot bolt and bushing to the split/folding rear seat back.
Tighten the pivot bolt to 10 N.m (89 lb in).
7. Install the split/folding rear seat back.