Malibu V6-3.1L VIN J (2002)
Seat Cushion: Service and Repair
Seat Cushion Cover Replacement - Front
Seat Cushion Cover Replacement - Front
Removal Procedure
1. Remove the front bucket seat.
2. Remove the seat back recliner handle from the recliner mechanism.
3. Remove the power seat switch bezel from the cushion cover, if equipped.
4. Unfasten the J-hook retainers from the sides of the seat cushion cover.
5. Unfasten the J-hook retainers for the cushion cover from the seat frame.
6. Route the rear seat cushion cover forward between the seat back and the cushion.
7. Unfasten the hook and loop strips which retain the cushion cover to the pad.
8. Remove the cushion cover from the pad.
Installation Procedure