Malibu V6-3.1L VIN J (2002)
Front Door Window Glass Weatherstrip: Service and Repair
Front Side Door Window Belt Outer Sealing Strip Replacement
Sealing Strip Replacement - Front Door Window Belt Outer
Removal Procedure
1. Remove the front door outer belt sealing strip screw (1) from the front door outer belt sealing strip (2).
2. Pull up on the rear of the front door outer belt sealing strip in order to release the strip from the retaining clips.
3. Slide the front door outer belt sealing strip (2) rearward to remove it from under the mirror.
4. Remove the front door outer belt sealing strip from the door.
Installation Procedure
1. Position the front door outer belt sealing strip (2) to the door.
2. Slide the front of the sealing strip under the mirror.
3. Align the front door outer belt sealing strip clips to the slots in the door. Push down until an audible snap is heard at each retaining clip in order to
engage the front door outer sealing strip (2) to the front door.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the front door outer belt sealing strip screw (1) to the front door outer belt sealing strip (2).
Tighten the front door outer belt sealing strip screw to 1 N.m (9 lb in).
