Malibu V6-3.1L VIN J (2002)
Rear Door Window Glass Weatherstrip: Service and Repair
Rear Door Window Belt Outer Sealing Strip Replacement
Sealing Strip Replacement - Rear Door Window Belt Outer
Removal Procedure
1. Remove the rear door outer belt sealing strip screw (1) from the rear door outer belt sealing strip (2).
2. Pull up on the door outer belt sealing strip (2) in order to release the strip from the retaining clips.
3. Remove the rear door outer belt sealing strip (2) from the door.
Installation Procedure
1. Align the rear door outer belt sealing strip clips to the slots in the rear door. Push down until an audible snap is heard at each retaining clip in order
to engage the door outer sealing strip (2) to the rear door.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the rear door outer belt sealing strip screw (1) to the rear door outer belt sealing strip (2).
Tighten the rear door outer belt sealing strip screw to 1 N.m (9 lb in).
