Malibu V6-3.1L VIN J (2002)
Brake Fluid Level Sensor/Switch: Service and Repair
Master Cylinder Fluid Level Sensor Replacement
Removal Procedure
1. Disconnect the electrical connector from the brake fluid level sensor (1).
2. Remove the brake fluid level sensor (3). Using needle nose pliers, carefully depress the retaining tabs on the end of the brake fluid level sensor and
press the sensor through the reservoir (1) to remove.
Installation Procedure
1. Place the brake fluid level sensor (1) into the reservoir, press into place to secure the sensor retaining tabs.
2. Connect the electrical connector to the brake fluid level sensor (1).