Malibu V6-3.1L VIN J (2002)
2. Apply sealant at the cylinder head to lower intake manifold joint at the rear of the lower intake manifold (1).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the right (rear) valve rocker arm cover.
Hand tighten the right (rear) valve rocker arm cover bolts.
Tighten the valve rocker arm cover bolts to 10 Nm (89 inch lbs.).
4. Install the vacuum hose to the grommet in the right (rear) valve rocker arm cover.
5. Install the ignition bracket with coils.
6. Install the generator bracket.
7. Install the generator.
