Malibu V6-3.1L VIN J (2002)
Parking Light Bulb: Service and Repair
HEADLAMP ASSEMBLY OR HEADLAMP BULB AND/OR CORNERING, SIDEMARKER, PARK, TURN SIGNAL BULB
REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood.
2. Hold the headlamp in place while pulling upward on the release tabs (1).
3. Remove the headlamp (2) by pulling straight forward from the headlamp mounting panel.
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
4. Disconnect the electrical connectors from the lamp sockets.
5. Remove the headlamp, and or park lamp sockets by rotating counterclockwise.
6. Pull the headlamp, and or park bulb from the socket.
INSTALLATION PROCEDURE
1. Push the headlamp, and or park bulb into the socket.
2. Install the headlamp, and or park lamp by rotating the socket clockwise.
3. Connect the electrical connectors to the lamp sockets.