chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Underhood Electrical Center or Junction Block Replacement|Page 1677 > < Underhood Electrical Center or Junction Block Replacement|Page 1675

Malibu V6-3.1L VIN J (2002)

Page 4
background image

16. Remove the electrical center box.

INSTALLATION PROCEDURE

1. With the electrical center turned upside down, install the electrical center box into the electrical center.
2. Connect the forward lamp wiring harness connector to the junction block.

3. Connect the IP wiring harness connector to the junction block.

Underhood Electrical Center or Junction Block Replacement|Page 1677 > < Underhood Electrical Center or Junction Block Replacement|Page 1675