Malibu V6-3.1L VIN J (2002)
Power Steering Line/Hose: Service and Repair
Pressure
Power Steering Pressure Hose Replacement
Removal Procedure
1. Remove the drive belt from the vehicle.
2. Remove the power steering hose retainer nut (1) from the retainer (2).
3. Remove the pressure hose (4) from the power steering pump (1).
4. Raise the vehicle on a hoist. Refer to Vehicle Lifting.
5. Remove the pressure hose (4) from the retainer (6).
6. Remove the pressure hose (4) from the power steering gear (5).
7. Remove the pressure hose (4) from the vehicle.
Installation Procedure