chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Underhood Electrical Center or Junction Block Replacement|Page 7030 > < Underhood Electrical Center or Junction Block Replacement|Page 7028
Page 7
background image

13. Slide the electrical center to the rear until the center snaps into the retainer tab.

14. Install all of the fuses and the relays.
15. Install the electrical center cover.
16. Install the positive battery cable lead to the stud on underhood electrical center, then install the positive battery cable lead retaining nut.

Tighten
Tighten the positive battery cable lead retaining nut to 10 N.m (89 lb in).

17. Install the air cleaner assembly.
18. Connect the negative battery cable.

Underhood Electrical Center or Junction Block Replacement|Page 7030 > < Underhood Electrical Center or Junction Block Replacement|Page 7028