Malibu V6-3.1L VIN J (2002)
2. Install the heated oxygen sensor, using a J 39194-B.
Tighten
Tighten the post catalytic converter HO2S 2 to 42 N.m (31 lb ft).
3. Connect the sensor electrical connector.
4. Lower the vehicle.
2. Install the heated oxygen sensor, using a J 39194-B.
Tighten
Tighten the post catalytic converter HO2S 2 to 42 N.m (31 lb ft).
3. Connect the sensor electrical connector.
4. Lower the vehicle.