Malibu V6-3.1L VIN J (2002)
Clockspring Assembly / Spiral Cable: Service and Repair
INFLATABLE RESTRAINT STEERING WHEEL MODULE COIL REPLACEMENT
REMOVAL PROCEDURE
1. Disable the SIR system. Refer to Air Bag(s) Arming and Disarming.
2. Remove the steering wheel assembly.
3. Remove the tilt lever.
4. Remove the instrument panel carrier.
5. Disconnect the SIR wiring harness from the back of the fuse panel.
6. Remove the multi-function lever.
7. Remove the coil assembly retaining clip (3).
8. Cut the plastic zip tie in order to remove the SIR coil wiring harness.
9. Remove the coil assembly (1).
INSTALLATION PROCEDURE
IMPORTANT:
^
When re-installing a previously removed coil assembly go to step 1.
^
When installing a new coil assembly go to step 2.
1. Install the coil assembly (1) to the steering column. Ensure that the coil assembly is centered.
IMPORTANT:
^
The coil assembly becomes un-centered under the following conditions: