Malibu V6-3.1L VIN J (2002)
5. Place the transmission control shifter assembly in the N (Neutral) notch in the detent plate.
6. Loosen the park/neutral position switch attaching bolts.
7. Rotate the switch on the shifter assembly in order to align the service adjustment hole with the carrier tang hole.
8. Insert a 2.34 mm (3/32 inch) maximum diameter gauge pin to a depth of 9.0 mm (9/64 inch).
-
Tighten the bolts to 24 Nm (18 ft. lbs.).