chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Underhood Electrical Center or Junction Block Replacement|Page 6872 > < Underhood Electrical Center or Junction Block Replacement|Page 6870

Malibu V6-3.1L VIN J (2002)

Page 5
background image

4. Connect the engine wiring harness connector to the junction block.

NOTE:  Refer to Fastener Notice in Cautions in Notices.

5. Install the bolts retaining the engine, IP, and forward lamp wiring harness connectors to the junction block.

Tighten
Tighten the electrical center junction block bolts to 7 N.m (62 lb in).

6. Connect the Instrument Panel (IP) wiring harness individual connectors to the junction block.

Underhood Electrical Center or Junction Block Replacement|Page 6872 > < Underhood Electrical Center or Junction Block Replacement|Page 6870