Malibu V6-3.1L VIN J (2002)
Tie Rod Boot: Service and Repair
Rack and Pinion Boot Replacement - On Vehicle
^
Tools Required
-
J 22610 Keystone Clamp Pliers
Removal Procedure
1. Remove the outer tie rod.
2. Remove the nut (5) from the inner tie rod assembly.
3. Remove the tie rod clamp (4).
4. Use side cutters to remove the boot clamp (2).
5. Discard the boot clamp.
6. Remove the rack and pinion boot (3).
Installation Procedure
1. Install the new boot clamp (2) onto the rack and pinion boot (3).