Malibu V6-3.1L VIN J (2002)
7. Scribe the strut flange.
Important: The steering knuckle must be supported in order to prevent axle joint over-extension.
8. Remove the bolts (6) and the nuts (2) attaching the strut (1) to the steering knuckle (3).
Notice: Care should be taken to avoid scratching or cracking the spring coating when handling the front suspension coil spring. Damage can cause
premature failure.
9. Remove the strut (1) from the vehicle.
Installation Procedure
Notice: Care should be taken to avoid scratching or cracking the spring coating when handling the front suspension coil spring. Damage can cause
premature failure.
1. Install the strut (5) into position and install the nuts (1) and one bolt (2) connecting the strut (5) to the body (3). Hand tighten the nuts and the bolt.
