Malibu V6-3.1L VIN J (2002)
Transmission Mount: Service and Repair
Transmission Mount Replacement - Side
Transmission Mount Replacement - Side
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the left front wheel and tire assembly.
3. Remove the left front splash shield.
4. Install a jackstand and a block of wood to support the transaxle.
5. Remove the thru-bolt from the transmission mount.
6. Unthread the rear upper mount bolt and leave in place.
7. Remove the remaining 3 mount bolts.
8. Remove the mount.
Installation Procedure