Malibu V6-3.5L VIN 8 (2004)
Antenna Amplifier: Service and Repair
ANTENNA AMPLIFIER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the headliner.
2. Disconnect the electrical connectors from the antenna amplifier.
3. Remove the fastener from the antenna and remove the antenna amplifier
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the antenna amplifier and secure with the fastener.
Tighten
Tighten the fastener to 3 N.m (26 lb in).
2. Connect the electrical connectors to the antenna amplifier.
3. Install the headliner.