Malibu V6-3.5L VIN 8 (2004)
pressed. The specific voltage signal from the switch is sent to the radio on the RUI2 circuit.
Seek (SEEK)
Press the SEEK button in order to seek to the next higher or lower station. The sound will mute when seeking another frequency. The SEEK button is
inactive when the front radio is in the SEEK mode.
Power (PWR)
Press the PWR push button in order to turn the rear seat audio system ON or OFF. The rear speakers mute when the power is turned ON. The rear seat
audio functions are operable even when the primary radio power is OFF.
Band Switching (AM/FM)
Press the AM/FM push button in order to select between (AM and FM) or (AM, FM1 and FM2) for radios with 2 FM bands. The selection appears on
the display. If the front passengers are already listening to AM-FM, the rear seat audio controller will not switch between the bands and cannot change
the frequency.
Source Switching (TAPE CD)
Press the TAPE CD push button in order to activate the source switching feature. There must be a cassette tape and/or compact disc in the player.
Preset Program (P.SET PROG)
Press the P.SET PROG button in order to select between pre-programmed station presets. The front passenger must be listening to something different
for the P.SET PROG to operate.
Volume (VOL)
Rotate the volume control in order to increase or decrease the volume. The top VOL knob controls the top headphone and the bottom VOL knob
controls the bottom headphone.
