Malibu V6-3.5L VIN 8 (2004)
Rear Bumper Cover / Fascia: Service and Repair
Fascia Replacement - Rear Bumper
Fascia Replacement - Rear Bumper
Removal Procedure
1. Apply tape to the corners of the adjacent surfaces.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the push-in retainers from the rear wheelhouse liner to the rear fascia.
4. Pull back the rear wheelhouse liner and remove the push-in retainers from the quarter panel to the rear bumper fascia.