Malibu V6-3.5L VIN 8 (2004)
1. If you are replacing the grill panel, perform the following procedures:
*
Install the plenum-to-hood seal.
*
Install new right and left hood rear side seals.
*
Install the windshield washer hose.
2. Position the air inlet grille panel to the vehicle. Ensure that the lace molding is laying properly on the lower edge of the windshield.
3. Install the push-pin fasteners to the air inlet grille panel.
4. Connect the windshield washer hose to the washer solvent hose.
5. Install the wiper arms.
