chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Trunk / Liftgate Hinge > < Liftgate Window Glass Weatherstrip|Service and Repair|Page 10130
Page 1
background image

Power Trunk / Liftgate Lock Switch: Service and Repair

REAR COMPARTMENT LID SWITCH REPLACEMENT

REMOVAL PROCEDURE

1. Remove the door trim pad.

2. Remove the deck lid switch from the door trim panel by depressing the tabs on the switch and pulling straight out.
3. Disconnect the electrical connector from the switch.

INSTALLATION PROCEDURE

1. Connect the electrical connector to the switch.
2. Install the deck lid switch to the door trim panel.
3. Install the door trim pad.

Trunk / Liftgate Hinge > < Liftgate Window Glass Weatherstrip|Service and Repair|Page 10130