Malibu V6-3.5L VIN 8 (2004)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel Replacement
Removal Procedure
1. Remove the wiper arms.
2. Disconnect the washer hose from the washer solvent container hose.
3. Remove the push-pin fasteners from the air inlet grille panel.
4. Remove the air inlet grille panel from the vehicle.
5. If you are replacing the grille panel, perform the following procedures:
*
Remove the plenum-to-hood seal.
*
Remove the windshield washer hose.
Installation Procedure
