Malibu V6-3.5L VIN 8 (2004)
4. Install the rear frame support brace to frame and body bolts. Hand tighten only.
Notice: Refer to Fastener Notice in Service Precautions.
5. Using a drift or suitable alignment tool, align the frame to body through the supplied alignment holes in the rear of the frame.
*
Tighten the frame to body bolts to 100 N.m (74 lb ft) plus 90 degrees.
*
Tighten the frame support to body bolts to 100 N.m (74 lb ft).
6. Remove the support fixture.