Malibu V6-3.5L VIN 8 (2004)
REMOVAL PROCEDURE
1. Remove the console armrest.
2. Open the rear cup holder.
3. Remove the console rear cup holder screws.
4. Remove the console rear cup holder.
INSTALLATION PROCEDURE
1. Install the console rear cup holder.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the console rear cup holder screws.
Tighten
Tighten the screws to 1 N.m (10 lb in).
3. Install the console armrest.
Trim Plate Replacement - Console Rear (UK6)
Trim Plate Replacement - Console Rear (UK6)
Removal Procedure
1. Remove the console armrest.