Malibu V6-3.5L VIN 8 (2004)
Trim Panel: Service and Repair
Garnish Molding Replacement - Center Pillar Upper
Garnish Molding Replacement - Center Pillar Upper
Removal Procedure
1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling Zone 8 in Restraint Systems.
2. Remove the fastener from the seat belt D-ring and remove the D-ring.
3. Remove the adjustable shoulder belt knob.
4. Starting at the top, remove the garnish molding by pulling forward.
Installation Procedure
1. Starting at the bottom, install the garnish molding to the vehicle.