chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Memory Positioning Systems|Description and Operation|Page 10583 > < Mirrors - Heated Mirrors, Defrosting Time
Page 1
background image

Memory Positioning Systems: Description and Operation

PERSONALIZATION DESCRIPTION AND OPERATION

PERSONALIZATION

The following options can be accessed in order by pressing the MENU button anytime while the vehicle is in ON. Press this button to scroll through
each option. All of the personalization options may not be available on your vehicle. Only the options available will be displayed on your DIC.
-

Oil Life Monitor Reset

-

Units Selection (English/Metric)

-

Remote Start Capability

-

Horn Chirp During Remote Keyless Entry Locking

-

Horn Chirp During Remote Keyless Entry Unlocking

-

Exterior Light Flash During Remote Keyless Entry Locking or Unlocking

-

Delayed Locking

-

Automatic Vehicle Unlocking: Specific Doors

-

Automatic Vehicle Unlocking: When Key is Off or When Shift To Park

-

Exterior Perimeter Lighting During Remote Keyless Entry Unlock

-

Security System Passive or Remote Keyless Entry Arming

-

Select Language: (English, French, Spanish or German)

When the desired option is reached, use the ENTER button to toggle between the modes of that option. To make a selection, press the MENU button
again.

If no selection is made within 10 seconds, the display will revert back to the previous information displayed.

The MENU mode is exited when the INFO button is pressed, a 10 second time period has elapsed, the ignition is turned to OFF or the end of the
MENU list is reached.

The following display messages may appear on your vehicles audio display by pressing the MENU button:

OIL LIFE RESET: When this option is displayed you can reset the Oil Life Monitor system. To reset the system to 100 percent, press and hold the
ENTER button for at least one second. An ACKNOWLEDGED display message will appear for three seconds or until the next button is pressed. This
will tell you the system has been reset.

UNITS: When UNITS appears on the display, press the ENTER button to move between Metric or English. When you have made your choice, press
the MENU button to record your selection. The initial setting from the factory is English.If you choose English, all information will be displayed in
English units. For example, distance in miles and fuel economy in miles per gallon is displayed.If you choose metric, all information will be displayed
in metric units. For example, distance in kilometers and fuel economy in liters per 100 kilometers is displayed. The unit measurement will also change
the trip odometer, temperature and average fuel economy displays.

REMOTE START: The remote start feature, if equipped, can be enabled or disabled. When REMOTE START appears on the display, press the
ENTER button to move between OFF and ON. When you have made your choice, press the MENU button to record your selection. The initial setting
from the factory is ON.

LOCK HORN: If your vehicle has remote keyless entry, this feature which allows the vehicle's horn to chirp every time the LOCK button on the
remote keyless entry transmitter is pressed, can be enabled or disabled. When LOCK HORN appears on the display, press the ENTER button to move
between ON and OFF. When you have made your choice, press the MENU button to record your selection. The initial setting from the factory is ON.

UNLOCK HORN: If your vehicle has remote keyless entry, this feature which allows the vehicle's horn to chirp every time the UNLOCK button on
the remote keyless entry transmitter is pressed, can be enabled or disabled. When UNLOCK HORN appears on the display, press the ENTER button
to move between ON and OFF. When you have made your choice, press the MENU button to record your selection. The initial setting from the
factory is OFF.

LIGHT FLASH: If your vehicle has remote keyless entry, this feature which allows the vehicle's exterior perimeter lighting to flash every time the
LOCK or UNLOCK button on the remote keyless entry transmitter is pressed, can be enabled or disabled. When LIGHT FLASH appears on the
display, press the ENTER button to move between OFF and ON. When you have made your choice, press the MENU button to record your selection.
The initial setting from the factory is ON.

DELAY LOCK: The delayed locking feature, which delays the actual locking of the vehicle, can be enabled or disabled. When DELAY LOCK
appears on the display, use the ENTER button to move between OFF and ON. When you have made your choice, press the MENU button to record
your selection. The initial setting from the factory is ON.

AUTO UNLK: The automatic door unlocking feature, which allows the vehicle to automatically unlock certain doors can be enabled or disabled.
When AUTO UNLK appears on the display, use the ENTER button to move between: ALL, DRVR or NONE. When you have made your choice,
press and the MENU button to record your selection. The initial setting from the factory is ALL.

Memory Positioning Systems|Description and Operation|Page 10583 > < Mirrors - Heated Mirrors, Defrosting Time