Malibu V6-3.5L VIN 8 (2004)
1. Install the cable to the latch assembly.
2. Install the cable to the seat back bolster assembly.
3. Install the bolster assembly.
Seat Back Panel Replacement - Front (Driver Side)
SEAT BACK PANEL REPLACEMENT - FRONT (DRIVER SIDE)
REMOVAL PROCEDURE
1. Remove the lumber knob, if equipped.
2. Starting at the top of the seat back panel, remove the push-in retainers by pulling the panel from the seat back frame.
3. Remove the seat back panel from the seat back frame by pulling straight up.
INSTALLATION PROCEDURE