Malibu V6-3.5L VIN 8 (2004)
1. Fasten the hog rings to Install the cushion cover to the pad.
2. Install the cushion cover and pad to the seat frame. Attach the J-straps on the cushion cover.
3. Install the rear cushion closeout to the seat frame.
4. If you are installing the 60 percent side, perform the following steps:
4.1.
Install the seat back hinge trim.
4.2.
Install the center seat belt retractor.
5. Install the seat back cover and pad.
Seat Cushion Pad Replacement - Rear (Sedan)
SEAT CUSHION PAD REPLACEMENT - REAR (SEDAN)
REMOVAL PROCEDURE
1. Remove the seat cushion from the vehicle.