chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Procedures|Page 11144 > < Sunroof / Moonroof Switch|Locations|Page 11141
Page 1
background image

Sunroof / Moonroof Switch: Procedures

SUNROOF SWITCH REPLACEMENT

REMOVAL PROCEDURE

1. Remove the overhead console cover.

2. Disconnect the electrical connector from the sunroof control switch.
3. Using a small flat-bladed tool disengage the sunroof control switch from the overhead console cover.

INSTALLATION PROCEDURE

1. Install the sunroof control switch into the overhead console cover. Press the switch into place until fully seated.

2. Connect the electrical connector to the sunroof control switch.
3. Install the overhead console cover. 

Procedures|Page 11144 > < Sunroof / Moonroof Switch|Locations|Page 11141