Malibu V6-3.5L VIN 8 (2004)
Installation Procedure
1. Inspect the caliper slide boots for cuts, tears, or deterioration. If damaged, replace the slides and boots.
2. Install the brake caliper to the brake caliper bracket.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 2 brake caliper pin bolts.
^
Tighten the brake caliper pin bolts to 35 Nm (26 ft. lbs.).
4. Install the park brake cable to the caliper.
5. Remove the caps or plugs from the brake caliper opening and the brake hose.
