Malibu V6-3.5L VIN 8 (2004)
5. Remove the 4 insulator bolts that attach the BPMV to the bracket.
6. Carefully lift the brake modulator assembly just enough to clear the bracket, then support the assembly.
7. Remove the bracket from the vehicle.
Installation Procedure
1. Install the bracket to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 4 insulator bolts.
^
Tighten the bolts to 10 Nm (86 inch lbs.).
3. Install the 3 nuts that attach the bracket to the left front wheelhouse.
^
Tighten the nuts to 10 Nm (86 inch lbs.).
4. Install the left front tire and wheel assembly.
5. Lower the vehicle.