Malibu V6-3.5L VIN 8 (2004)
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the park brake pedal assembly to the vehicle.
2. Install the 2 nuts to the front brake cable mounting bracket.
^
Tighten the nuts to 10 Nm (89 inch lbs.).
3. Install the left rear park brake cable (2) to the crush bracket (5).
4. Install the right rear park brake cable (1) to the crush bracket (5).
5. Install the floor console.
6. Install the 2 front cable plastic retainers to the body.
7. Install the front cable retainer screw.
^
Tighten the screw to 2 Nm (18 inch lbs.).
