Malibu V6-3.5L VIN 8 (2004)
13.
Install the two bolts.
Tighten
Tighten the two bolts to 115 Nm (85 lb-ft).
14.
Install the rear tire and wheel assembly. Install the wheel nuts.
Tighten
Tighten the wheel nuts to 140 Nm (103 lb-ft).
15.
If necessary, perform Steps 3-14 on the other wheel bearing assembly.
16.
Lower the vehicle.
17.
Pump the brake pedal 2-3 times in order to seat the rear disc brake pads to the rotor.