Malibu V6-3.5L VIN 8 (2004)
Exhaust Crossover Pipe: Service and Repair
Exhaust Crossover Pipe Replacement
Removal Procedure
1. Remove the exhaust crossover pipe nuts.
2. Remove the exhaust crossover pipe.
3. If any of the studs on the exhaust system break, they can be replaced in a manner similar to a wheel lug.
4. Using a hammer and drift, drive out the broken portion of the stud.
5. Install a new stud by driving the replacement stud flange using a ball pein hammer.
Installation Procedure