Malibu V6-3.5L VIN 8 (2004)
12. Remove the exhaust manifold nuts.
13. Remove the exhaust manifold assembly.
14. Remove the exhaust manifold gasket.
Installation Procedure
1. Install a new manifold gasket on the cylinder head.
2. Install the exhaust manifold.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the exhaust manifold nuts.
^
Tighten the exhaust manifold nuts to 16 Nm (12 ft. lbs.).
4. Install the rear catalyst assembly and gasket.
5. Install the crossover pipe and gaskets.