Malibu V6-3.5L VIN 8 (2004)
2. Install the intermediate pipe to the hangers.
Lubricate the exhaust system hangers with Dielectric Silicone Grease GM P/N 12345579 (Canadian P/N 1974984) to ease installation.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the intermediate pipe bolts to catalytic converter.
^
Tighten the intermediate pipe bolts to 30 Nm (22 ft. lbs.).
4. Clamp the muffler (2) to the intermediate pipe (1).
5. Align the two halves of the exhaust system to prevent contact with underbody components and torque the exhaust system clamp.
^
Tighten the exhaust clamp nuts to 50 Nm (37 ft. lbs.).
6. Lower the vehicle.
