Malibu V6-3.5L VIN 8 (2004)
Cigarette Lighter: Service and Repair
CIGAR LIGHTER HOUSING OR 12 VOLT ACCESSORY POWER RECEPTACLE REPLACEMENT
TOOLS REQUIRED
J 42059 Cigar Lighter Socket Remover
REMOVAL PROCEDURE
1. Disconnect the 12-volt power supply fuse.
2. Remove the power supply by placing one side of the "T" portion of the tool J 42059 into the tab window and then angle the other side into the
opposite tab window, then pull the lighter socket straight out.
3. Remove the power supply wire harness connector.
INSTALLATION PROCEDURE
1. Install the power supply wire harness connector.
2. Align the tabs on the power supply socket with the slots on the power supply retainer.
3. Connect the power supply.
4. Connect the 12-volt power supply fuse.