Malibu V6-3.5L VIN 8 (2004)
8. Connect the roof rail module-left connector to the vehicle harness connector.
9. Install the CPA to the roof rail module-left connector.
10. Install the garnish molding to the left upper lock pillar.
11. Connect the I/P module connector (1) to the vehicle harness connector (2).
12. Install the CPA to the I/P module connector (1).
13. Install the passenger/right outer trim cover to the instrument Panel (I/P) (3).
14. Connect the seat belt pretensioner-RF connector.
15. Install the CPA to the seat belt pretensioner-RF connector.
16. Install the right lower center pillar trim.
