Malibu V6-3.5L VIN 8 (2004)
1. Install the thermostat bypass pipe.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the thermostat bypass pipe-to-engine front cover bolt.
^
Tighten the bolt to 11 Nm (98 inch lbs.).
3. Connect the thermostat bypass pipe hose.
4. Using the J 38185, reposition and secure the hose clamp at the thermostat bypass pipe.
5. Install the thermostat bypass pipe to the throttle body stud.
6. Install the thermostat bypass pipe-to-throttle body nut.
^
Tighten the nut to 25 Nm (18 ft. lbs.).
7. Connect the heater outlet hose to the thermostat bypass pipe.