Malibu V6-3.5L VIN 8 (2004)
3. Connect the PCM harness connectors.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants,
or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may
damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Starting and Charging. Tighten the battery
terminal bolts to 17 Nm (13 lb ft).
Important: Following the PCM reprogramming , the PCM will have to learn the crankshaft position variation for misfire diagnostics.
5. Perform the crankshaft relearn procedure, See: Testing and Inspection/Programming and Relearning
6. Verify no DTCs exist.
7. Reset the clock and preset radio stations.
