Malibu V6-3.5L VIN 8 (2004)
Body Control Module: All Technical Service Bulletins
BCM - Brake Pedal Position Learn Procedure
Bulletin No.: 03-08-47-002A
Date: April 22, 2005
INFORMATION
Subject:
BCM Setup/Sensor Calibration Brake Pedal Position (BPP) Learn Procedure (PCM DTC P0703)
Models:
2004 Chevrolet Malibu
with 3.5L Engine (VIN 8 - RPO LX9)
Supercede:
This bulletin is being issued to cancel Corporate Bulletin Number 03-08-47-002. Please discard Corporate Bulletin Number 03-08-47-002 (Section 08 -
Body and Accessories).
Due to a software issue with previously released software, a "work around procedure" was developed for the BCM setup/sensor calibration brake pedal
position (BPP) learn procedure. New software has since been released and this "work around procedure" is no longer necessary.
Disclaimer
