Malibu V6-3.5L VIN 8 (2004)
1. Clean the sealing surface of the BPMV, with denatured alcohol and a clean shop cloth.
2. Use care when aligning the EBCM to the BPMV electrical terminals. Install the EBCM to the BPMV.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 4 EBCM-to-BPMV retaining bolts (1).
^
Tighten the bolts in a criss-cross pattern.
^
Tighten the bolts to 5 Nm (44 inch lbs.).
Important: Ensure that the electrical connector Is correctly inserted properly into the EBCM prior to swinging the assist locking lever into
position. Failure to make a proper connection may cause communication problems with the module.
4. Connect the electrical connector to the EBCM.
5. If installing a new EBCM it is necessary to program the EBCM. See: Testing and Inspection/Programming and Relearning
