Malibu V6-3.5L VIN 8 (2004)
13. Remove the RH door trim panel (2).
14. Remove the connector position assurance (CPA) (3) from the SIS-Right connector (4).
15. Remove the SIS-Right connector (4) from the SIS (2).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. To enable the SIS-Right go to step 3. To enable the roof rail module-right go to step 7, and to enable the seat belt pretensioner-RF go to step 9.
3. Install the SIS-Right connector (4) to the SIS (2).
4. Install the CPA (3) to the SIS-Right connector (4).