Malibu V6-3.5L VIN 8 (2004)
5. Remove the SIR module from the vehicle.
INSTALLATION PROCEDURE
IMPORTANT: Position the module tether rearward of the molding attaching clips.
1. Unpack the new inflator assembly. Start at the rear of the vehicle and install the inflator module to the structure.
2. Working from the rear of the vehicle, install the retaining tabs to the structure to hold the inflator module in place.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Visually inspect the side curtain to assure that the curtain is not twisted.
