Malibu V6-3.5L VIN 8 (2004)
Knee Diverter: Service and Repair
Knee Bolster Replacement
KNEE BOLSTER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) left outer trim cover.
2. Remove the I/P left trim panels.
3. Remove the left closeout panel.
4. Remove the knee bolster screws.
5. Remove the knee bolster.
INSTALLATION PROCEDURE
1. Install the knee bolster.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Tighten the knee bolster screws.
Tighten
Tighten the screws to 2.5 N.m (22 lb in).
3. Install the left closeout panel.
4. Install the I/P left trim panels.
5. Install the I/P left outer trim cover.