Malibu V6-3.5L VIN 8 (2004)
Negative: Service and Repair
Disconnect/Connect Procedure
BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE
REMOVAL PROCEDURE
CAUTION:
-
Refer to SIR Caution in Service Precautions.
-
Refer to Battery Disconnect Caution in Service Precautions.
1. Record all of the vehicle preset radio stations.
2. Turn OFF all the lamps and the accessories.
3. Make sure the ignition switch is in the OFF position.
4. Disconnect the battery negative cable from the battery.
5. Remove the battery tray cover.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the
battery cable to the battery terminal.
1. Connect the battery negative cable to the battery.
Tighten
Tighten the bolt to 17 N.m (13 lb ft).
2. Reset the radio stations and the clock.
