Malibu V6-3.5L VIN 8 (2004)
10. Install the other end of the ground strap to the coil as shown and secure using a new bolt, P/N 11588715.
11. Install the other three ignition coil bolts.
Tighten
Tighten the bolts to 10 Nm (89 lb in).
12. Connect the right side spark plug wires to the ignition coil.
13. Connect the left side spark plug wires to the ignition coil.
14. Connect the ignition coil electrical connector.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table above.
Disclaimer