Malibu V6-3.5L VIN 8 (2004)
5. Locate and remove the AIR BAG (IGN) and AIR BAG (BATT) fuses from the BCM fuse center.
6. To disable the seat belt pretensioner-RF go to step 7. To disable the roof rail module-right go to step 10 and for the side impact sensor (SIS)-Right
go to step 13.
7. Remove the lower center pillar trim.
8. Remove the connector position assurance (CPA) from the seat belt pretensioner-RF connector.
9. Disconnect the seat belt pretensioner-RF connector from the vehicle harness connector.
10. Remove the garnish molding from the upper lock pillar.
11. Remove the connector position assurance (CPA) from the roof rail module-right connector.
12. Disconnect the roof rail module-right connector from the vehicle harness connector.